The double column microcomputer tensile testing machine is used to test the force on the object when it is broken after being loaded with electric tensile force. The machine can be equipped with push-pull meter for different tests. It is flexible in use, convenient in operation and adjustable in travel speed.

Safety instructions:

Double column microcomputer tensile testing machine should be handled carefully after being transported to your company, with a relatively spacious place. Before use, check whether screws and fasteners are loose during transportation. Professional operators shall be assigned to operate the equipment during use, and non professional operators shall keep a certain distance from the equipment. The power supply of the tensile testing machine is AC220V, the ground wire must be grounded, and the voltage in the case is 220V high voltage. Do not open the back door of the case at will. The machine shall be cleaned once a month after use, and lubricating oil shall be added at the lubricating place. One year from the date of purchase. The company will not be responsible for all consequences caused by non-compliance with safety operation.

Parameter Description:

1. Power supply: AC220V / 50Hz

2. Power: 200W

3. Maximum tensile strength: 200kg (maximum)

4. Stroke: 40cm (excluding clamp)

5. Display mode: large screen LCD, full Chinese multi visual window display

6. Load resolution: 1 / 10000

7. Load accuracy: ± 1%

8. Test speed: 25-250mm / min adjustable

9. Stretching mode: continuous value and peak value real-time exchange

10. Pull off stop function

11. Unit switching: kg, N, IB real-time display

12. Pull off automatic stop

15. Meet various test standards

16. Number of test pieces: 1pcs

17. Volume: 400 (L) × 250 (d) × 1250 (H) mm