The automatic wire plug and pull force tester is a wire testing machine department of shenzhen lianxin testing equipment co., LTD., which is specially developed for the wire/cable industry.
Low speed rise button: press this button, the machine will rise 0.01mm; If this button is pressed continuously, the machine will be raised at low speed.
Medium speed rise button: press this button and the machine will rise 0.10mm; If this button is pressed continuously, the machine will be raised at medium speed.
High-speed rise button: press this button, the machine will rise 1.00mm; If this button is pressed continuously, the machine will be raised at high speed.
Low speed descent button: press this button to lower the machine by 0.01mm; If this button is pressed continuously, the machine will be lowered down at low speed.
Medium speed descent button: press this button to lower the machine by 0.10mm; If this button is pressed continuously, the machine will be lowered at medium speed.
High-speed descent button: press this button to lower the machine by 1.00mm; If this button is pressed continuously, the machine will be lowered down at high speed.
Start and press the button: when the test setting is completed, enter the execution interface. After pressing the switch, the test will automatically start according to the current setting.
Stop button: after starting the test, if you want to terminate the test, press the stop button on the execution interface. The machine will stop the test after the test of the current project.
Communication indication: when the test items are set and measured, the high-frequency flashing will indicate smooth communication.
Work indication: when the machine is energized, it will be displayed here that the machine starts to work.
Upper limit: when the machine moves up and touches the upper limit ring, the alarm will be lit and the buzzer will ring at the same time.
Lower limit: when the machine moves down and touches the lower limit ring, the alarm will be lit and the buzzer will ring at the same time.
Note: the rise or fall buttons on the operation panel will not take effect until the computer is turned on and the test software is entered.
Automatic wire (wire/cable), insertion force testing machine is mainly used in cable, USB interface, mobile phone charger, etc all kinds of wire/cable interface after repeated insert and pull out strength, which can use frequency of the product and the service life, automatic insertion force tester is each big wire/cable production processors indispensable wire test machine.