DC high-voltage wire tester is applied to all kinds of high-voltage wire/cable open circuit, short circuit, conduction impedance test wire tester, so how to use and install DC high-voltage wire tester, installation of DC high-voltage wire tester what steps and precautions?
1. Please confirm the power supply of the power supply device and connect it to AC 220V power supply
2. Connect the adapter to the Cable to be tested as required.
3. Turn on the power and the system will execute the self-test program
4. After the execution of the test program, it will enter the lx-898 system officially.
5. To terminate, press [power switch] to terminate
6. After starting up, self-test will be performed, which will take about 5~10 seconds
7. In the state of {READY}, the operation auxiliary keys S1~S6 have the following adjustment functions
8.S1 lighten the backlight of the LCD
9.S2 dimmed the backlight of the LCD
The above content is provided by shenzhen lianxin testing equipment co., LTD. More technical knowledge about the installation, maintenance and repair of wire testing machine, please pay attention to the content of this site, or contact with our r & d and production department of wire testing machine.